NSEQ-2 студийный двух канальный ламповый параметрический эквалайзер.

381 802 р.

NSEQ-2 студийный двух канальный ламповый класс А параметрический эквалайзер и 2х канальный класс А транзисторный параметрический эквалайзер. Четыре полосы эквалайзера для каждого канала.
товар отсутствует Артикул: NSEQ-2 MILLENNIA
  • Two paths to perfection with Twin Topology™
  • Fully parametric stereo EQ with unprecedented sonic purity
  • & integrity
  • All triode 300 V vacuum tube signal path or...
  • All discrete J-FET solid state signal path
  • Both topologies are entirely transformerless high voltage,
  • pure Class A
  • Minimalist design: only one active stage in the audio path
  • Four EQ bands: 20 Hz to 20 kHz center frequency, 0.4 to 4.0 Q
  • Extremely low noise: -106 dBu
  • Constructed for demanding professional applications
  • Ultra-Premium components throughout
  • Gold relays, connectors, switches, tube sockets
  • Silver Teflon power wiring
  • Mogami Neglex OFC audio wiring
“Q” Range: Q = 0.4 to 4.0 Adjustable on middle ranges Q = 1.0 Fixed on low & high ranges
Maximum Output Level: > + 28 dBu (VT)
Maximum Input Level (EQ Flat): + 28 dBu (VT)
Maximum Input Level (EQ Full Boost): + 17 dBu (VT)
Frequency Response: +0 / -3 dB sub 2 Hz to beyond 300 kHz
Frequency Response, Stereo Deviation: < .15 dB
Noise (All EQ Stages In, Controls Flat): -106 dBu (SS), -94 dBu (VT)
Maximum Boost (21 Step Detented): +20 dB (+10 dB with range switch in)
Maximum Cut (21 Step Detented): -20 dB (-10 dB with range switch in)
EQ Frequencies:
Low Range Switch (Centers - Peak/Shelf Selectable): 20, 34, 56, 100, 180, 270
Low Mid Sweep: 20 Hz - 220 Hz or 200 Hz - 2.2 kHz.
10X Range switch selectable:
Hi Mid Sweep: 250 Hz - 2.5 kHz or 2.5 kHz - 25 kHz.
10X Range switch selectable:

High Range Switch (Centers - Peak/Shelf Selectable) 4.8 k, 5.8 k, 8.0 k, 10 k, 16 k, 21 k

THD + Noise : 20 Hz - 30 kHz,
All EQ Bands Switched In: < .009%, typ < .003 % (VT or SS)
Common Mode Rejection Ratio: (With Balanced Option)
10 Hz - 20 KHz, 100 mV C.M.: > 60 dB, Typ > 80 dB
Slew Rate, +27 dBu Out: > 50 volts per microsecond
Main Hard-wire Bypass Switch For Each Channel: Yes
Peak/Shelf Selection On High & Low Range: Yes
Hard-wire Bypass Switching On Individual EQ Bands: Yes
Input Impedance: 25 kilohms
Minimum Output Load Impedance: 1 kilohm (VT), 150 ohms (SS)
Recommended Load: > 3 kilohms (VT)
Output Impedance: < 300 ohms (VT), < 5 ohms (SS)
Twin Topology EQ Amplifiers Switch In: Pure Class-A Discrete J-FETs
Switch Out: Pure Class-A Triode Tubes
Power Consumption: 40 watts maximum
Power Requirements Selectable: 100-120, 200-240 V ac, 50/60 Hz
Dimensions/Shipping Weight: 19” W x 3.5” H x 12.5”, 26 lbs.