Millennia Media NSEQ-4 параметрический эквалайзер 2 канала

цена по запросу

Двухканальный параметрический эквалайзер на дискретных элементах.
товар отсутствует и возможно снят с производства Артикул: NSEQ-4
  • World's first (and only) all-discrete, true differential Class-A input buffer/amplifier.
  • Selectable balanced or unbalanced input.
  • Greatly improved 3rd generation FSA-03 all-discrete EQ amplifier
  • Improved output stage, no muting required (as with Twin Topology)
  • True hard-wire bypass when EQ not selected
  • Upgraded power supply leading to improved sonic performance
  • Fully parametric stereo EQ with unprecedented sonic purity
  • & integrity
  • All discrete J-FET solid state signal path
  • Minimalist design: only one active stage in the audio path
  • Four EQ bands: 20 Hz to 20 kHz center frequency, 0.4 to
  • 4.0 Q
  • Extremely low noise: -106 dBu
  • Constructed for demanding professional applications
  • Ultra-Premium components throughout
  • Gold relays, connectors, switches,
  • Silver Teflon power wiring
  • Mogami Neglex OFC audio wiring
“Q” Range: Q = 0.4 to 4.0 Adjustable on middle ranges Q = 1.0 Fixed on low & high ranges
Maximum Output Level: > + 28 dBu
Maximum Input Level (EQ Flat): + 28 dBu
Maximum Input Level (EQ Full Boost): + 17 dBu
Frequency Response: +0 / -3 dB sub 2 Hz to beyond 300 kHz
Frequency Response, Stereo Deviation: < .15 dB
Noise (All EQ Stages In, Controls Flat): -106 dBu
Maximum Boost (21 Step Detented): +20 dB (+10 dB with range switch in)
Maximum Cut (21 Step Detented): -20 dB (-10 dB with range switch in)
EQ Frequencies:
Low Range Switch (Centers - Peak/Shelf Selectable): 20, 34, 56, 100, 180, 270
Low Mid Sweep: 20 Hz - 220 Hz or 200 Hz - 2.2 kHz. 10X Range switch selectable.
Hi Mid Sweep: 250 Hz - 2.5 kHz or 2.5 kHz - 25 kHz. 10X Range switch selectable.
High Range Switch (Centers - Peak/Shelf Selectable): 4.8 k, 5.8 k, 8.0 k, 10 k, 16 k, 21 k
THD + Noise: 20 Hz - 30 kHz, All EQ Bands Switched In < .009%, typ < .003 %
Common Mode Rejection Ratio 10 Hz - 20 KHz, 100 mV C.M.: > 60 dB, Typ > 80 dB
Slew Rate, +27 dBu Out: > 50 volts per microsecond
Main Hard-wire Bypass Switch For Each Channel: Yes
Peak/Shelf Selection On High & Low Range: Yes
Hard-wire Bypass Switching On Individual EQ Bands: Yes
Input Impedance: 25 kilohms
Minimum Output Load Impedance: 50 ohms
Recommended Load: > 500 ohms
Output Impedance: 5 ohms
EQ Amplifiers: Pure Class-A Discrete J-FETs